|
Quantity
|
Total
|
||
|
|
|||
|
|
|||
EasySolar-II 24/3000/70-32 GX Inverter – is the ultimate "all-in-one" solution for designing advanced autonomous and hybrid energy systems. The device compactly combines several key components at once:
- Precision inverter MultiPlus-II with a capacity of 3000 VA / 2400 W (with a peak load of up to 5500 W)
- Ultra-fast intelligent charger from the mains/generator (24 V, 70 A)
- Highly efficient SmartSolar 250/70-Tr MPPT controller (supports up to 2 kW of active solar generation and operation with solar arrays up to 5 kW)
- Advanced GX system controller with an informative display and Wi-Fi, Ethernet, VE.Direct, USB, BMS-Can ports
- Reliable automatic transfer switch (transfer relay) mains/battery for 230 V / 32 A, capable of passing up to 7.35 kW of power in transit through the inverter
This device is ideal for creating complex ESS systems, power supply for private houses, mobile laboratories, small business facilities, and telecommunications infrastructure. It guarantees absolute reliability, uninterrupted operation of the power grid, and deep online control of all parameters.
Key advantages of the EasySolar-II inverter
- Nominal output power: 3000 VA / 2400 W, outstanding peak overload – 5500 W
- Integrated solar MPPT 250/70 – processes up to 2000 W of pure solar power, withstands input voltage up to 250 V Voc, demonstrates efficiency up to 99%. The controller is hardware-protected and easily withstands an overload of connected panel power of up to 300%.
- Integrated GX system management controller – provides a clear display of all system parameters. Thanks to built-in Wi-Fi, VE.Bus interfaces, and access to the VRM cloud, you get total control over the object via the Internet: from secure software updates and deep configuration changes to receiving alarm PUSH messages to a smartphone and providing remote access to service center engineers.
- Powerful 24 V / 70 A charger with an intelligent temperature compensation algorithm allows you to professionally service absolutely any chemical type of batteries, including advanced lithium solutions (LiFePO4).
- Extremely low zero-load consumption: from 13 W to an incredible 3 W (in Search Mode) – the inverter practically does not consume energy for its own operation, saving battery charge when there is no consumption.
- PowerControl and PowerAssist technologies — unique dynamic balancing of generator and external grid power. With these technologies, you will never experience an emergency trip (knocking out) of the input circuit breaker or a fatal overload of the diesel generator.
- Reference hardware compatibility with LiFePO₄ batteries: the presence of a BMS-Can bus allows connecting the inverter, built-in charger, and MPPT controller to the smart BMS battery board with a single cable. This guarantees 100% safety and durability of using expensive lithium assemblies.
- Impressive temperature endurance: from –20… to +45°C, well-thought-out active cooling allows mounting the device in motorhomes, mobile kungas, outdoor communication cabinets, and unheated cabins.
- Extremely compact body (499×268×237 mm) with a weight of 26 kg.
Technological features
Integrated controlling GX-controller: display, network protocols, remote monitoring
- High-contrast 2-line LCD display for instant reading of battery bank indicators, solar generation, and inverter status
- Built-in Wi-Fi and Ethernet modules for reliable and fast connection to the VRM cloud portal
- USB and VE.Direct interfaces for local monitoring, configuration, and firmware downloads
- BMS-Can bus — for precision synchronization of operation with lithium batteries
Heavy-duty MPPT 250/70 SmartSolar – uncompromising solar energy utilization
- Ability to process up to 4200 W of energy, problem-free digestion of 300% overload of connected panel array power
- Intelligent multi-stage (3 stages) charging: Bulk / Absorption / Float – perfectly adapted for lithium (LiFePO4) and lead-acid batteries
- The device is ideal for strings assembled from 48-cell solar panels, and also features a flawless tracking algorithm with partial shading of the array.
PowerAssist® and unique PowerControl® function
- PowerControl technology via software limits power draw from the generator or a weak city grid, preventing them from overloading
- PowerAssist technology instantly, without delay, mixes (adds) missing power to the grid directly from the batteries during short-term peak consumption surges
- This is an ideal technical solution for facilities with an extremely weak or unstable input power source
Victron ESS Intelligent Energy Management System – built into the core of EasySolar-II
Supported operation scenarios:
1. Classic Grid in-line (sequential) mode:
- Solar energy (PV) primarily charges batteries or directly powers the local load
- If there is a shortage of solar power – the deficit is compensated from the battery or from the external grid
- In the event of a complete loss of the city grid – a seamless automatic transition to UPS mode powered by batteries occurs
2. Hybrid Grid parallel mode:
- Energy synergy: Sun (PV) + external grid + battery bank = mathematically optimized self-consumption of the facility
- Total control of energy efficiency thanks to vector current analysis (when using an external current sensor)
- The ESS algorithm via software blocks reverse export (overflow) of energy into the grid (if this is prohibited by the local energy provider)
- The device fully supports integration with systems operating under a green tariff
3. Hard Back-up only / Off-grid mode (full autonomy):
- Provides full energy independence, critical equipment is powered 24/7
- Hard-coded power draw priority: Sun (PV) → Batteries (Battery) → Diesel generator
Hardware support for LiFePO₄ with BMS – the key to safety and maximum durability
The EasySolar-II GX inverter is equipped with a factory BMS-Can interface, which guarantees:
• 100% operational safety: absolute protection against fatal overcharging, cell overvoltage, and battery pack overheating
• Smart control: continuous reading of SOC (charge percentage), operating voltage, and precise battery temperature
• Dynamic adaptation of voltage curves and charging parameters in real time
• The maximum possible service life (resource) of batteries, as well as strict compliance with all warranty conditions of the manufacturers of lithium batteries
Popular application scenarios
- Private households with solar power plants - processing up to 2 kW of generation, powerful backup function
- Campers, motorhomes, dachas, mobile kungas - reliable autonomous "all-in-one body" format energy system
- Office buildings, service stations, restaurants, and small businesses - uncompromising uninterrupted power supply for cash registers and servers
- Cellular base stations, remote facilities - guaranteed backup of critical infrastructure
- ESS complexes with maximum self-consumption and software support for multi-rate tariffs
Communication and integration interfaces
- VE.Bus – Highly reliable bus for parallel and three-phase operation, connection to powerful external GX devices, displays, and control panels
- VE.Direct – Port for switching with additional external Victron MPPT controllers and high-precision battery monitors (SmartShunt, BMV series)
- BMS-Can – Dedicated high-speed communication line with smart lithium batteries (supports brands Sacred Sun, Sunlight, BYD, Pylontech, MG Energy, etc.)
- Wi-Fi / Ethernet – Modules for connecting to the Internet, remote control, dispatching, and firmware updates via the VRM cloud platform
- USB – Universal port for direct PC connection, firmware flashing, and peripheral connection via USB hubs
- Built-in programmable relay – Used to automate the autostart of a diesel generator or close emergency shutdown circuits