Victron Blue Smart IP22 Charger 24V 8A single-output smart with Bluetooth - BPC240842002 — buy in Georgia

Home

Catalog

Chargers

24V chargers

24V chargers Victron Energy

Victron Blue Smart IP22 Charger 24V 8A single-output smart with Bluetooth - BPC240842002

In stock

SKU: BPC240842002

Leave your feedback

5 year warranty

Intelligent charger Victron Energy Blue Smart IP22 Charger 24/8 (1) — is a high-tech, professional-grade device designed for the efficient and safe charging of 24-volt batteries with a current of up to 8A. The model is equipped with one isolated output and a built-in Bluetooth module, which allows you to fully control and configure the workflow remotely via the proprietary VictronConnect mobile app on your smartphone, tablet, or PC. This 24V 8A charger is perfect for use in commercial workshops, as well as for maintaining batteries in trucks, buses, special machinery, motorboats, boats, and autonomous camper systems. Innovative adaptive charge management algorithms and a special storage mode guarantee maximum service life for your batteries, significantly outperforming the capabilities of standard chargers from other manufacturers.

Main advantages of the Blue Smart IP22 Charger 24/8 (1)

Wireless control via Bluetooth: Remote monitoring of battery status and precise parameter adjustments in real time via the VictronConnect app. Ready-made presets for common battery types are available in the system, as well as a fully manual configuration mode.
Adaptive multi-stage charge algorithm: The device automatically optimizes the charging process based on the current state of the battery, extending its operational resource by 3-4 times compared to conventional chargers.
Storage Mode (Storage Mode): Automatically reduces the voltage after the battery is fully charged, preventing plate corrosion, electrolyte gassing, and capacity degradation during long periods of inactivity.
Maximum efficiency up to 94%: Minimizes energy consumption and reduces heat dissipation during operation. In idle (standby) mode, the device consumes only 0.5W!
Versatility and LiFePO₄ support: The device is compatible with all types of lead-acid, AGM, and GEL batteries, and also serves as a reliable charger for lithium batteries (including lithium iron phosphate batteries).
Comprehensive electronic protection: Built-in modules for automatic protection against overheating, short circuits, and reverse polarity (incorrect connection) ensure absolute operating safety.
Quiet cooling algorithm: The built-in fan is activated only when strictly necessary, guaranteeing virtually silent operation of the device in most standard scenarios.
Recondition Mode (Recondition Mode): A unique recovery algorithm for deeply discharged or old "dead" batteries.
Night silent mode (Night Mode): Reducing the output power to 50% allows completely eliminating the launch of the cooling fan for maximum acoustic comfort at night.

Technical features and system capabilities

Smart 6-stage charge cycle: The process is divided into successive stages (testing – bulk – absorption – recondition – float – storage) to achieve an ideal result.
High-precision current regulation: Ability to manually limit the maximum charge current in the range from 25% to 100% of the nominal value with a step of just 0.1A.
Real-time statistics and OTA updates: Track current indicators and update the device's firmware "over the air" via Bluetooth. Each new software version adds useful functions.
Automatic temperature compensation: Adjusts the charge voltage depending on the ambient temperature, preventing undercharging in freezing cold and dangerous overcharging in hot weather.
Stabilized Power Supply Mode (Power Supply Mode): The charger can be used as a stable DC power supply for 24V low-voltage equipment without requiring a mandatory connection to a battery.
Non-volatile settings memory: Configuration changes made via Bluetooth are written to the internal memory and are not reset when disconnected from the 220V grid or battery terminals, which is critical for integration into motorhome and yacht systems.
Save user profiles: Create unique setting profiles for different batteries and instantly switch between them when needed.
VE.Smart networking ecosystem:
- Scale the overall system power by combining up to 8 chargers for parallel joint operation (for example, 24V 8A x 8 = 24V 64A).
- Synchronize the device with modern Victron battery monitors for absolute capacity control in critical systems.
- Connect the remote Smart Battery Sense sensor (up to 10 meters away) to automatically compensate for the voltage drop over long power cables.

Scenarios and fields of practical application

Auto repair shops, service stations, and repair workshops: A reliable professional tool for maintenance, diagnostics, and regeneration of a wide range of customer 24-Volt batteries.
Commercial and cargo transport: Preventative charging, seasonal maintenance, and capacity retention for the batteries of trucks, buses, tractors, and construction machinery.
Marine transport (boats, yachts, motorboats): Safe charging of onboard service and 24V starter batteries, ensuring stable operation of navigation systems and fishfinders.
Motorhomes, campers, and special vehicles: Providing autonomous energy to living modules, powering lighting and household appliances during trips.

Official compliance with the strict automotive standard E4-10R guarantees that the Victron Blue Smart IP22 charger is fully protected against external electromagnetic interference (mobile communications, radio signals) and does not create any interference with the vehicle's sensitive factory electronics (ABS units, multimedia units, onboard computer, or lighting systems).

Comparative characteristics of Blue Smart IP22 series models

Device Model	Voltage	Charge Current	Number of Outputs	Bluetooth	Dimensions (LxWxH)
Blue Smart IP22 Charger 12/15 (1)	12V	15A	1	Yes	235x108x65 mm
Blue Smart IP22 Charger 12/15 (3)	12V	15A	3	Yes	235x108x65 mm
Blue Smart IP22 Charger 12/20 (1)	12V	20A	1	Yes	235x108x65 mm
Blue Smart IP22 Charger 12/20 (3)	12V	20A	3	Yes	235x108x65 mm
Blue Smart IP22 Charger 12/30 (1)	12V	30A	1	Yes	235x108x65 mm
Blue Smart IP22 Charger 12/30 (3)	12V	30A	3	Yes	235x108x65 mm
Blue Smart IP22 Charger 24/8 (1)	24V	8A	1	Yes	235x108x65 mm
Blue Smart IP22 Charger 24/12 (1)	24V	12A	1	Yes	235x108x65 mm
Blue Smart IP22 Charger 24/16 (1)	24V	16A	1	Yes	235x108x65 mm
Blue Smart IP22 Charger 24/16 (3)	24V	16A	3	Yes	235x108x65 mm

What is included in the package

Intelligent charger Blue Smart IP22 Charger 24/8 (1) with 230V power cord
Branded packaging box
User manual (operating instructions)
Warranty card
Certificate of conformity — available in electronic form upon request

Is it allowed to use this charger for lithium-ion batteries?

Yes, the Blue Smart IP22 Charger intelligent device is fully compatible with lithium batteries, including lithium iron phosphate modifications (LiFePO₄). You can activate the required working profile in just a couple of clicks via the proprietary VictronConnect app. The presence of an advanced engineering mode with manual settings allows detailed configuration of the device for any other types of lithium-based cells: Li-ion, Li-Po, LiCoO2, LiMn2O4, Li-NMC (NMC), as well as NCA.

Can two different types of batteries be connected simultaneously? (This question is relevant for models with three outputs)

No, when charging several batteries simultaneously, they must belong to the exact same chemical type. For example, you can connect AGM, GEL lead-acid batteries and classic starter batteries in parallel. However, combining lithium and lead-acid batteries in one cycle is strictly prohibited. The reason is that the isolated outputs of the device do not have separate independent regulation: one common algorithm (same charge phases and voltage parameters) is applied to all channels. Accordingly, all connected batteries must be fully compatible with the selected operating profile.

How is the wireless connection to the device established via Bluetooth?

Install the official VictronConnect app on your tablet or smartphone. Turn on the Bluetooth module on your mobile gadget, launch the program, and select your charger from the list of equipment discovered nearby. In case the security system requests a password (PIN code) and it is missing on the device body or box, enter the standard factory combination: 000000 (six zeros).

What should I do if the charger does not pair via Bluetooth?

Make sure the device is connected to the 220V power grid and you are within the stable range of the wireless signal. Try restarting the mobile app and the charger itself. If the connection is still not established, go to the system Bluetooth settings of your smartphone or tablet and remove ("forget") this device from the general list of paired gadgets. Please note: synchronization must be carried out strictly through the interface of the VictronConnect app, and not through the standard Bluetooth settings menu of your phone!

Is this equipment suitable for use on boats and in high-humidity rooms?

Yes, this is possible. Although the official protection class of the device casing is IP22 (which implies operation in mostly dry locations), its internal electronic components are hermetically sealed with a special polymer compound that reliably protects the board from moisture. According to the technical datasheet, the device works stably at air humidity up to 98%. Nevertheless, if there is a risk of direct flooding, splashing, or submersion of the equipment in water, it is strongly recommended to buy models with a higher protection class — for example, specialized series like Blue Smart IP65 Charger or Blue Smart IP67 Charger.

What is the operating principle of the gentle storage mode ("Storage Mode")?

This function switches the device into a special mode that automatically reduces the charging voltage as soon as the battery reaches 100% capacity. This completely eliminates the danger of overcharging, minimizes plate wear, and significantly increases the overall service life of the battery during long seasonal downtime.

Is it allowed to use this device as a regular power supply?

Yes, a specialized operating mode — Power Supply Mode — is provided in the functionality of the Victron Blue Smart IP22. With its help, the charger easily transforms into a stable DC source, allowing you to directly power low-voltage equipment and onboard devices without connecting to battery terminals at all.

How often should the built-in software (firmware) be updated?

We recommend checking for updates in the VictronConnect app once every few months. The company's engineers regularly optimize charging algorithms, so updating the firmware "over the air" in a timely manner will grant access to improved features and increase overall system stability.

Why are the battery connection cables missing from the factory package?

This is professional power equipment, which in most scenarios is installed permanently on board vehicles, boats, yachts, or motorhomes. Such installations always require an individual approach to cable length and cross-section. For a safe connection, it is recommended to use high-quality flexible stranded copper DC wire with an adequate cross-sectional area, and it is mandatory to use an appropriate fuse or circuit breaker in the circuit.

What is the algorithm for charging three batteries simultaneously? (Question for three-channel versions)

You can charge one, two, or three batteries in parallel, provided that they have the same electrochemical base (usually lead-acid starter batteries, AGM, or GEL). The charging process of each connected element is monitored individually based on its current state and depth of discharge. If necessary, the total current is intelligently distributed by the microprocessor among the three working channels, while 100% of the device's power can be delivered through one specific output if the other channels are free or the batteries on them are already charged.

Will the official warranty be voided if the stock AC power plug is cut off?

No, the factory warranty obligations remain fully in force if you need to replace or extend the 230V power cord. The native cable length is 1.5 meters, which is usually sufficient for most domestic scenarios; however, during permanent professional installation, you have the right to adapt the power cord as you see fit.

Rate this item

498 GEL

Quick order

Features

Maximum input AC voltage, V~	265
Minimum input AC voltage, V~	180
Charge current, A	8.0
Night mode or low power charge current, A	4.0
Output voltage, V	24
Number of outputs	1
Efficiency	94%
No-load standby power consumption, W	0,5
Maximum input frequency (Hz)	65
Minimum input frequency (Hz)	45
Charge algorithm (number of stages)	6
Bluetooth availability	Yes
Can be used as a power supply	Yes
Humidity (non-condensing)	98%
Protection	Reverse polarity, Overheating, Short circuit
Maximum operating temperature (+°C)	50
Minimum operating temperature (-°C)	20
Battery connection	Screw terminals 13mm² (AWG6)
230V mains connection	Cable with plug
Weight, kg	1.0
Dimensions, mm (H x W x D)	235 х 108 х 65
Safety standards:	EN 60335-1, EN 60335-2-29
Electromagnetic compatibility standards:	EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity to electromagnetic interference standards:	EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Automotive directive standards:	E4-10R
Protection class	IP22
Warranty period, months	60

	Quantity	Total

Total 0 GEL Proceed to checkout