Victron Energy BlueSolar 30W-12V Mono Solar Panel - (SPM040301200)

What are the key performance features and cell technology of this photo-module?

The Victron Energy BlueSolar 30W-12V Mono solar panel features a peak power rating of 30W, utilizing premium monocrystalline silicon cells. This configuration ensures exceptional energy output per square meter and steady performance under diffuse light conditions.

What are the physical dimensions and unit weight of this solar panel?

This module has physical dimensions of 560 x 350 mm and an anodized frame thickness of 25 mm. Weighing 2.2 kg, it allows for straightforward installation on pitched roofs, ground mounts, or mobile platforms.

How well is the panel protected against severe weather conditions and thermal stress?

The module is fully adapted to diverse climates, operating between -40°C and +85°C. The tempered front glass reliably safeguards the silicon cells from hail impacts, heavy snow loads, and high wind forces.

What electrical specifications are critical when matching this panel with a charge controller?

With a maximum power voltage (Vmp) of 18.70V and current (Imp) of 1.61A, we advise pairing it with a SmartSolar MPPT controller. This configuration ensures rapid battery charging and minimal energy losses.

Will the system output drop significantly if a portion of the module is shaded?

Yes, output decreases, but integrated bypass diodes prevent shaded sections from shutting down the entire panel string. This prevents hot-spot damage and maintains optimal overall performance.

How is the electrical connection made and what is the wire length?

Standard solar cables with UV-protected MC4 connectors are utilized. The connection is fully sealed (IP67) and engineered to withstand prolonged exposure to direct sunlight.

Can multiple modules of this type be connected into high-voltage arrays?

The panel is rated for a maximum system voltage of 1000V. This allows you to construct series strings of several modules, facilitating efficient power transmission over distance.

Which open-circuit and short-circuit parameters are required for safety design?

The open-circuit voltage (Voc) is 22.87V and the short-circuit current (Isc) is 1.76A. These ratings are used to select the correct capacity for fuses, breakers, and disconnects.

What is the duration and scope of the manufacturer's warranty?

Victron Energy offers a 5-year warranty covering assembly defects. Additionally, a performance warranty ensures the output remains above 90% after 10 years and above 80% after 25 years.

How should the front glass be cleaned to ensure optimal sunlight absorption?

Clean the front surface of dust and debris periodically using plain water and a soft squeegee or cloth. Do not use chemical solvents, detergents, or abrasive scrubbers.